 |
Safety Valves, Relief Valves, Safety Relief Valves, Steam Traps, Pressure Relief Valves
|
|
|
|
Safety
Valve & Relief Valve Manufacturer Since 1947 |
|
|
Selecting the Proper Valve...
Aquatrols valves are factory set, tested, sealed and tagged
to service your specific application. Air, Steam, Gas or Liquid.
The pressure relief or pop off point are set in accordance to
safety and capacity requirements.
 Recommended
settings to not exceed 10% of the vessels or lines operation
pressure.
As required by the ASME all valves manufactured for Steam servicing
must have a handle lift lever. For Air and Gas this is optional.
Aquatrol’s liquid Valve series has the option of a handle
wheel for field adjustments.
Inlet and outlet sizes. Industry standards are Male Inlet and
Female outlet. Please specify if otherwise. Space or the valves
physical size may also be a consideration.
Refer to each listing for sizes, capacities, pressure settings
and applications.
When Ordering...
Please specify the service usage (Air, Gas, Liquid or Steam);
Set pressure (pop off or relief point), size of the piping thread
to be used and Serial Number. Contact
Us if there are any particular sizing questions requirements
or competitors comparisons needed.
|
|
 |
|
